Four-channel safety valve tester

JC-HXF-4 four-channelSafety valve function testerIt is used to test the peak pressure and automatic closing pressure of new energy safety valves or similar functional products, to determine whether the product under test meets the requirements of technical standards according to the set criteria, and to test both the airtightness and flow performance of safety valves.

JC-HXF-4 four-channelSafety Valve Function Tester

Self-developed OS system, more streamlined interface, simple operation

Based on 32-bit processor, 24-bit A/D converter, fast response to AI algorithm test speeds

Original imported pressure sensor chip, automatic environmental drift correction

Original imported SMC precision regulator and high sensitivity sensor, high accuracy of test data

Powerful IoT function, can realize remote management Support barcode scanning and MES data interactive uploading, traceable history records and printing

Multi-channel can be customized to save labor and increase capacity.

 

 

Scope of Application

Four-channel Safety Valve Tester-Jingcheng Technology Co.

 

 

Video Case

 

 

For more detailed airtightness testing solutions and equipment selection, please visit the website of Jingcheng Industrial Technology:www.air-tester.comOr contact online customer service

Brand

JCGK Jingcheng Gongke

Product Model

JC-HXF-4

Test range

2kPa~0.8MPa (customizable)

timekeeping range

0~999.9S can be set

Flow range

1000ml/min (customizable)

Resolution

0.01kPa, 1Pa, 0.1ml/min, 0.01ml/min

Test Accuracy

0.1%F.

test unit

kPa, Pa, bar, psi, sccm

Number of access roads

Stand-alone 4 (stand-alone analysis, multi-channel support)

preset parameter

50 groups

Data export

USB port

communication interface

RS485, RJ45 network interface, optional RS232

AD signal

24-bit

I/O Interface

Input 6 Output 6

Touch screen

10" LCD screen

Power source

AC110V~240V 50/60Hz

Use of gas supply

Use clean air well above the test pressure and less than 0.8 MPa.

operating environment

Temperature 5~45°C Humidity 80%RH or less (no condensation)

regulator mode

Manual / Automatic

external control and drive

Group 4-1

communication protocols

Modbus RTU, Modbus TCP

Instrument volume

45×57×29cm

Instrument weight

About 19.8~20kg

Online Message

Common Problems

Yes, we are.JCGK Jingcheng GongkeIt's the source manufacturer. As a company with deep technical accumulation and rich manufacturing experience, we not only specialize in product development and production, but also committed to providing customers with high-quality technical support and after-sales service. Therefore, you can choose our products and services with confidence.

JCGK Jingcheng GongkeThe instruments are mainly used in new energy, household appliances, automobile parts, consumer electronics, medical equipment, security lighting, valves and pipes, wire connectors and other industries.Air tightness testing, new energy safety testing and non-standard automation customization.

Air tightness testing equipment::Test the product (or component) for watertightness and waterproofness to ensure that there is no water or air leakage defects in the product under test.
 
New Energy Test Equipment::New energy batteries are tested for overturning pressure/bursting pressure test/breathing cycle pressure resistance to ensure their product quality and safety.
 
Non-standard automation equipment::Non-standard customization for various testing needs of the product under test, providing the best solution for customer's product quality and safety.

Yes, you can.JCGK Jingcheng GongkeAlways put the quality in the first place, to ensure that each piece of equipment has gone through a rigorous inspection and testing, the performance of the instrument is comparable to or even exceeded some of the imported brands.

We are committed to creatingBetter domestic alternativesIn order to provide customers with better service and cost-effective products.Let customers enjoy imported quality with domestic price.

In general.The test time depends on the volume of the product under test, the material and the inspection accuracy required.For small products, testing may take only a few seconds to a few minutes to complete. For large or complex products, on the other hand, testing may take longer, even hours.

Standardized instrument production cycle:Some models in stock for immediate shipment.
Instrument production lead time is generally within 5~7 working days.

Tooling production cycle:Fixtures are non-standard customized, usually 15~20 working days.
It needs to go through the process of design and drawing, purchasing, machining, outsourcing plating, assembling, and commissioning!

Overall, general projects can be delivered in about 25 working days! Complex non-standard projects may take longer, you can coordinate the delivery time with our business engineers.

滚动至顶部
滚动至顶部