Hands-on teaching you the use of air tightness tester and operating instructions

Airtightness Testeris forA test equipment for testing the waterproof performance of sealsIt is widely used mainly in automated production lines in industrial production, especially forNew energy, household appliances, auto parts, consumer electronics, medical equipment, security lighting, valves and pipes, wire connectorsand other products for various industriesWater Resistance Testcap (a poem)Sealing testThe

It canEffective quality control on the production linecap (a poem)production efficiency(math.) genusTest the waterproof performance of the product to see if it meets the requirementsThis ensures that there will be no leakage or other problems during the use of the product, and helps companies to improve product quality and market competitiveness.

Airtightness TesterThe working principle of theUtilizing air pressure difference to test the sealing performance of productsnamelyUse a certain pressure of air pressure to simulate a certain depth of water pressure to test the waterproof grade of the product.. By filling the product under test with gas at a set pressure, after inflation and equilibrium (i.e., the gas is filled with the product and distributed uniformly), detecting the pressure drop in a certain time interval, and calculating whether the leakage amount is within the set range according to the gas equation of state, so as to determine whether the product is leaking or not, which is called the "leakage" in the industry.pressure dropThe

Typically, pre-testing requiresPlace the product under test on the test fixture.Then, the gas is delivered through the factory gas source or booster pump to increase the pressure inside the test fixture cavity. Then, the sensor detects the change of air pressure inside the test chamber, so as to judge whether the sealing performance of the product meets the waterproof standard.

utilizationAirtightness TesterTo perform the test, you generally need to follow the steps below:

1. Prepare the product under test:Place the product to be tested into the tooling fixture.
2. Connect the air source and air line:Connect the instrument to the factory air source (or booster pump) and make sure the fixture and instrument air lines are clear.
3. Set the test parameters:According to the waterproof requirement of the product under test, set the corresponding airtightness test parameters, such as pressure range, test time, leakage rate, etc.
4. Start testing:Press the test button, the instrument will automatically carry out the test and display the test result. If the test result meets the requirements, the green light will be on and the instrument interface will display OK, then the product airtightness is qualified; if it does not meet the requirements, the red light will be on and the instrument interface will display NG, then the product airtightness is unqualified.
5. Record test results:Record the test results in the history test record and categorize them for storage, which can be exported via USB flash drive.
6. Maintenance and upkeep:After the test, the instrument needs to be maintained and serviced to ensure long-term stable operation.

It is important to note that different types ofAirtightness TesterSpecific procedures and methods of use may vary. It is best to read the instrument's operating instructions and follow them before conducting the test. Meanwhile, for some complex products, multiple tests may be required to ensure the accuracy of the test results.

Shenzhen Jingcheng Industrial Co.As a manufacturer specializing in airtightness testing for more than 10 years, we have always been committed to China's smart manufacturing.Support for waterproofing products for all industriesAir tightness testercustomizablecap (a poem)Fully automated airtightness testing programSupply.